micro:bit solutions

Featured

bit:booster

from $34.99

Enable students to explore physical computing with the micro:bit and bit:booster. Order with or without a micro:bit. Comes with 5 How To cards to start exploring physical computing out of the box.

bit:buddy

from $14.99

The bit:buddy provides a compact, complete solution for taking your micro:bit projects on the go. This low cost solution is the perfect introduction to the micro:bit and works great for wearable technology.

Open Hardware Cables

$10.00

Looking for an easy way to use parts from other kits with your micro:bit and bit:booster (or even Arduino & Raspberry Pi)? These 10" cables will save you money by making it easier to re-use old parts. We designed three different cables to work with the most common third party hardware out there. Select the best bundle based on your needs.

bit:buddy+

from $24.99

The bit:buddy+ is the newest, feature-packed micro:bit solution from Lectrify.

We challenge you to find a more feature rich board in such a small footprint.

Designed to work with micro:bit v1, micro:bit v2 and the Adafruit CLUE board.

Battery pack and USB cable included.

Accessories: OLED display with Cable

$5.00

This 0.96” OLED display has 128X64 Pixels and can be easily coded to in Microsoft MakeCode. It includes the cable needed to use the I2C port on the bit:booster and bit:buddy+

This versatile accessory is a powerful, low cost must-have for any micro:bit project.

sale

bit:buddy - (5mm posts- V1 micro:bit only)

from $7.99

CLEARANCE SALE

NOTE: This listing is for the inventory that only works with V1 micro:bit. Newer bit:buddy boards use a 7mm screw-down post compatible with V1 & V2 micro:bit boards

The bit:buddy provides a compact, complete solution for taking your micro:bit projects on the go. This low cost solution is the perfect introduction to the micro:bit and works great for wearable technology.

sale

bit:explorer

from $18.99

LAUNCH SALE! Order now and save 25%

Coding is a journey and exploring should be fun: the bit:explorer is your ultimate companion.

Order with or without a micro:bit. Comes with 4 How To cards to start exploring physical computing out of the box.

sale

Mission Control

from $12.99

INTRODUCTORY SALE - SHIPPING EXPECTED 9/11/2023

Mission Control is an add-on board for the bit:explorer or Makey:bit that makes it easy to add an OLED screen, 4 buttons and a joystick.

Mission Control components are fully supported in in the most common micro:bit programming environments like MakeCode, microPython, etc., enabling students to easily code projects like games, remote controls, texting apps…

sale

Mission Control: Stand Alone game controller/remote control

from $14.99

The Mission Control is a lightweight micro:bit add-on board that adds an OLED screen, joystick and 4 buttons to your micro:bit in a game-controller form factor with onboard battery.

sale

JetPack

from $14.00

JetPack is an add-on board for the bit:explorer or Makey:bit that makes it easy to add an OLED screen, 2 DC Motors, 4 Servo Motors, I2C and more neopixels.

JetPackl components are fully supported in in the most common micro:bit programming environments like MakeCode, microPython, etc., enabling students to easily code projects in robotics or physical computing where multiple motors are needed.

STANDALONE KITS

Featured

LED 20 Pack

$15.00

Light up your DIY projects with LEDs. We now offer 20 packs of loose LEDs in our most popular colors and sizes

Shake it Mini Cardboard Robot_Page_1.png

Shake it mini Bulk Pack

$65.00

Make your own pizza racer project or robot critters with Shake it minis. The pack includes 15 Shake it mini boards.

Serves 15 students

Circuit Craft Pack

$65.00

Skill Level: Beginner-Intermediate

Duration: 1-2 hours

Learn about simple circuits, conductivity and resistance while making open-ended circuit crafts.

Serves 20 students

Electricity and Engineering Classroom Pack

$499.00

The Electricity and Engineering Classroom pack is a portable maker space and includes everything you need to do engineering and circuit projects with your students. This kit includes everything for students to do our most popular, standards based projects… and more.

Bulk Coin Cell CR2032 Battery Holders with Switch

from $20.00

This low ost battery pack is designed to be the only battery pack you'll need for your maker projects. Whether you are sewing LEDs to a shirt, making circuit crafts with pipe cleaners or adding LEDs to LEGO.

COMPACT DESIGN - PCB measures only 24mm X 24mm

ON/OF SWITCH - Save on batteries with the ON/OFF switch
PERFECT FOR SMALLER FINGERS - Large switch and power terminals make it easier to sew or connect with using your preferred materials.
LEGO COMPATIBLE - Designed to snap onto LEGO
COLOR CODED - Positive is marked RED and Negative is marked WHITE making it easy to troubleshoot your circuit.

Sold Out

200 individually packaged 2032 Batteries

$30.00

Individually Packaged

Bundled in packs of 5 batteries
0% Mercury, Lead or Cadmium
Perfect for brushbots, LED and paper crafts.

Conductive Tape Bundle

from $12.00

Can’t decide between Copper Tape or Conductive Nylon Tape, with this bundle, you don’t have to.

Included in this bundle you get:

20meter roll of 5mm width Copper Tape with conductive adhesive.
20meter roll of 5mm width Conductive Nylon Tape with conductive adhesive.
3D printed tape dispenser.

Electricity & Circuits

Featured

Battery + LED Pack

$50.00

Skill Level: Beginner

Duration: 1-2 hours

Students explore electricity by making their own paper clip circuits. In this activity, students gain familiarity with conductivity, resistance, the flow of electricity and how to make simple circuits!

Sold Out

Circuit Craft Pack

$65.00

Skill Level: Beginner-Intermediate

Duration: 1-2 hours

Learn about simple circuits, conductivity and resistance while making open-ended circuit crafts.

Serves 20 students

Soft Circuits

$65.00

Skill Level: Intermediate

Duration: 2-3 hours

Students make their own light-up wearable tech projects with LEDs and conductive materials.

Serves 20 students

LEGO Crafts

$65.00

Skill Level: Beginner-Intermediate

Duration: 1-2 hours

Learn about simple circuits, conductivity and resistance while making open-ended circuit crafts.

Serves 20 students

Bulk Coin Cell CR2032 Battery Holders with Switch

from $20.00

This low ost battery pack is designed to be the only battery pack you'll need for your maker projects. Whether you are sewing LEDs to a shirt, making circuit crafts with pipe cleaners or adding LEDs to LEGO.

COMPACT DESIGN - PCB measures only 24mm X 24mm

ON/OF SWITCH - Save on batteries with the ON/OFF switch
PERFECT FOR SMALLER FINGERS - Large switch and power terminals make it easier to sew or connect with using your preferred materials.
LEGO COMPATIBLE - Designed to snap onto LEGO
COLOR CODED - Positive is marked RED and Negative is marked WHITE making it easy to troubleshoot your circuit.

Sold Out

200 individually packaged 2032 Batteries

$30.00

Individually Packaged

Bundled in packs of 5 batteries
0% Mercury, Lead or Cadmium
Perfect for brushbots, LED and paper crafts.

Conductive Tape Bundle

from $12.00

Can’t decide between Copper Tape or Conductive Nylon Tape, with this bundle, you don’t have to.

Included in this bundle you get:

20meter roll of 5mm width Copper Tape with conductive adhesive.
20meter roll of 5mm width Conductive Nylon Tape with conductive adhesive.
3D printed tape dispenser.

Learn To Solder - Sugar Skull

from $12.00

Build a sugar skull with large, color changing eyes!

sale

Learn To Solder - Holiday Tree

from $12.00

SOLDERING KIT & CRAFT PROJECT - Once the LEDs have been soldered, the tree can be easily personalized with pipe cleaners, markers, stickers and stick-on gems… use your imagination!

sale

Conductive Tape

from $6.00

5mm wide conductive nylon tape in 20M (~60ft) roll.

Engineering

Featured

Turkey Racer

$100.00

Skill Level: Beginner

Duration: 1-2 hours

Explore engineering concepts with this hands-on interactive project.

Serves 15 students

Pizza Racer

$50.00

Skill Level: Beginner-Intermediate

Duration: 2 hours

Explore the engineering process with a pizza racer project.

Each kit serves 10 students (or 20 if paired)

Exploring Engineering

$45.00

Skill Level: Intermediate

Duration: 1-2 hours

Students explore Newton's 2nd Law using both versions of the Shake it board.

Serves 10 students

sale

STEM Kits - Turkey Racer

from $5.00

Skill Level: Beginner

Duration: 1-2 hours

Explore engineering concepts with this hands-on interactive project.

STEM Kits - Pizza Racer

from $5.00

Skill Level: Beginner-Intermediate

Duration: 2 hours

Explore the engineering process with a pizza racer project.

STEM Kits - Dancing Space Monster

from $5.00

Skill Level: Beginner

Duration: <1 Hour

Explore engineering concepts with this hands-on interactive project.

Individually packaged kits are perfect for both remote learning and classrooms.

STEM Kits - LED Flashlight

from $5.00

Skill Level: Beginner

Duration: <1 hour

Learn about simple circuits by building a functional flashlight with a battery, LED, brass brads and copper tape.

Screen Shot 2021-02-17 at 11.03.39 AM.png

STEM Kits - Exploring Electricity

from $5.00

Skill Level: Beginner

Duration: 1-2 hours

Explore how circuits and electricity works through a craft based project followed by a science experiment using a conductivity probe.

STEM Kits - Sugar Skull

from $5.00

Skill Level: Beginner

Duration: <1 hour

Learn about simple circuits, including the difference between serial and parallel circuits by building a Sugar Skull with flashing, color changing LEDs and conductive tape.

STEM Kits - Dancing Daisy Racers

from $5.00

Skill Level: Beginner-Intermediate

Duration: 2 hours

Explore the engineering process by racing colorful daisies!

simple Logic

Featured

Sold Out

Simple Logic: Switches

$30.00

Skill level: Beginner

Duration: 1-2 hours

Explore how switches enable simple logic.

soldering

Featured

Soldering Kit: TouchPad

from $10.00

Transistors are the building blocks for modern electronics and the Touchpad circuit is a great introduction to their basic function.

Soldering Kit: NiteLight

from $10.00

Take your exploration of transistors the next step beyond the TouchPad with this board that uses a a photo-transistor coupled with an NPN transistor to create a light activated circuit.

Soldering Kit: Blinker

from $10.00

Learn how to make LEDs blink while exploring how capacitors work.

Soldering Kit: Sensor

from $10.00

Build a circuit that senses a change in a sensor while exploring the properties of this fundamental circuit, the Wheatstone Bridge.

The Full Set

$35.00

Master your soldering skills with all four Very Useful Circuits.

Learn To Solder - Sugar Skull

from $12.00

Build a sugar skull with large, color changing eyes!

sale

Learn To Solder - Holiday Tree

from $12.00

SOLDERING KIT & CRAFT PROJECT - Once the LEDs have been soldered, the tree can be easily personalized with pipe cleaners, markers, stickers and stick-on gems… use your imagination!